Categories : SoftWare

FANUC SERVO GUIDE is a Windows® application that allows a quick and easy optimization of servos and spindles axes.
This software provides the integrated environment to test programs, set parameters and data measurement, needed for
servo and spindle tuning.
Direct connection is possible between the Personal Computer and CNC through Ethernet.

Key functions
• Easy connection to the CNC
• Integrated working environment for tuning machine servo and spindles
• Integrated and optimized environment for creating, tuning and optimizing programs, measuring data and changing
• Measurement of servo and spindle data as well as external triggering events from the PMCat once
• many automatic adjustment functions
3-D View function
With this function, it is possible to view the result X, Y and Z coordinate data of the 3-D graph captured by SERVO GUIDE. 3-
D graph and time-based waveform are displayed in the same window, and a point on 3-D graph easily corresponds to the
point on time axis.
For example, it is possible to display tool path of machining center by capturing position data of X, Y and Z axis. By
selecting points on the tool path, you can check waveforms of each servo axis, which corresponds to the selected area. 5-
axis machining is also supported. Position of 5 axes are converted to tool center point, and 3-D path of tool is visualized. In
addition, axis configuration including Cs axis(spindle axis) is also supported.

Effective and easy-to-use PC tool for:
• Setup support for servo and spindle functions
• Optimization of servo and spindle control
• Display of path error for troubleshooting machining quality issues
• Finding potential to reduce machining cycle time
• Troubleshooting of servo and spindle related alarms


2018/06/25 Edition 11.20
– Because the hardware key is not recognized on Windows 10 Version 1803,
3-D View Function (option) can not be used.
This problem had been avoided at SERVO GUIDE edition 11.20

2018/06/08 Edition 11.10
– Improvement of ParameterWindow
+ Addition of parameter screens for Smart Rigid Tapping
+ Addition of parameter screens for Pressure and Position Control
+ Improvement of parameter screens for Backlash Acceleration
– Addition of measurement data kind in the GraphWindow
– Tuning Navigator(Improvement of AI Servo Tuning)
+ Support of tuning for Axis Synchronous Control
+ Addition of the measure when the communication between PC and CNC is disconnected


This is an upgrade package. If you don’t have a lower version of the software in your computer, you can download the V7.3 version from this website, and then install this version of the software to upgrade。click to down it:FANUC SERVO GUIDE V7.3

©The copyright of the downloaded resources belongs to the author; All resources of this site are from the network, only for learning use, please support the genuine!

Leave a Reply

Your email address will not be published. Required fields are marked *